---
title: "Heat Transfer Oils Mobiltherm 603, 605 and 610 | Mobipol"
description: "Heat transfer oils Mobiltherm 600 for forced-circulation heat transfer systems. Check temperature limits and price, order online or ask an expert."
url: "https://mobipol.pl/en/asortment/lubricants-for-industry/heating-oils/"
canonical: "https://mobipol.pl/en/asortment/lubricants-for-industry/heating-oils/"
markdown: "https://mobipol.pl/en/asortment/lubricants-for-industry/heating-oils/index.md"
lang: en
alternate:
  pl: "https://mobipol.pl/asortyment/srodki-smarne-dla-przemyslu/oleje-grzewcze/"
---

# Heat transfer oils

Mobiltherm 603, 605 and 610 are mineral heat transfer fluids (not heating fuel oil) for indirect, forced-circulation heating and cooling systems. Order online or ask an expert to choose the grade.

- **Original Mobil oils** — from an authorized distributor
- **Since 1993** — in machine lubrication
- **20 L and 208 L** — order online from OlejeSklep
- **Oil analysis** — oil condition in one report

## Choose your oil and order online

### Mobiltherm 600

_Mineral heat transfer fluid_

Mineral heat transfer oil for indirect, forced-circulation heating and cooling systems in industrial processes.

Choose it when:

- you have an indirect heating or cooling system
- the oil runs in forced circulation
- bulk oil in a closed system reaches up to 315°C

Viscosity: [Mobiltherm 603](https://olejesklep.pl/produkty/mobiltherm-603), [Mobiltherm 605](https://olejesklep.pl/produkty/mobiltherm-605), [Mobiltherm 610](https://olejesklep.pl/produkty/mobiltherm-610)

## What a good heat transfer oil protects against

Heat transfer oil circulates in the system for a long time at high temperature. When it starts to break down, it forms deposits, sludge and coke on heating surfaces, and heat transfer weakens before the system shows it.

| Threat | How the oil protects |
| --- | --- |
| Thermal cracking and coke | Mobiltherm 600 is made from highly refined base oils that resist thermal cracking. It protects the system against deposits, sludge and coke. |
| Oxidation and viscosity increase | The oil is thermally stable and resists oxidation, so it works long without deposits or viscosity increase. |
| Flash point drop | At recommended temperatures Mobiltherm does not lose much flash point. That is why you choose the grade by the highest oil temperature in your system. |
| Local overheating | Use Mobiltherm only in forced-circulation systems. Convection circulation does not give the flow that protects the oil from local overheating. |
| Cold system startup | Good low-temperature fluidity makes a cold system easier to start. Mobiltherm 603 has the lowest pour point in the series, −15°C. |

## When to change heat transfer oil? Test a sample

Heat transfer oil ages slowly, and faster when the system exceeds recommended temperatures. Sample analysis shows viscosity, oxidation and contamination, so you change the oil when it is needed.

- [Heat transfer oil analysis](https://olejesklep.pl/analizy-olejowe/analiza-olejowa/analiza-olejowego-nosnika-ciepla-w-ukladzie-grzewczym)

## Ask an expert

**Jan Kowalski**, Technical Engineer for Lubricants

A graduate of Poznan University of Technology. At Mobipol he provides technical support to industrial customers and runs training on oils and greases.

Phone: [+48 71 359 34 62](tel:+48713593462)

## Questions before you buy

### Mobiltherm 603, 605 or 610 — which one?

The highest bulk oil temperature in your system decides. In a closed system 603 works up to 285°C, and 605 and 610 up to 315°C; in an open system 603 up to 150°C, 605 up to 180°C and 610 up to 250°C. For Mobiltherm 610 the manufacturer also gives the oil film temperature: up to 330°C in a closed system and up to 265°C in an open one.

### Is Mobiltherm suitable for an open system?

Yes, within the lower temperature limits given for each grade. The manufacturer does not recommend it where hot oil contacts air directly, because sprayed or leaking hot oil can self-ignite.

### Can I top up another heat transfer oil with Mobiltherm?

No. The manufacturer recommends not mixing Mobiltherm with other oils, because mixing reduces their thermal stability and oxidation resistance and makes remaining oil life harder to assess. Plan the changeover with us.

### Can the system run above the recommended temperature?

Only if it is designed for it, e.g. pressurized with an inert gas such as nitrogen. Otherwise there is a risk of vapor lock, and the oil breaks down much faster and has a shorter life.

### When to change heat transfer oil?

Oil condition decides, not the calendar. Regular sample analysis shows whether the oil can keep working. Also test it after the system overheats, because above the recommended temperature the oil breaks down much faster.
